Scratch4Arduino 安裝 ( S4A Installation )

若您覺得文章寫得不錯，請點選文章上的廣告，來支持小編，謝謝。
If you like this post, please click the ads on the blog. Thank you very much.

安裝步驟為( The steps are: )：

1. 下載S4A軟體並安裝 ( Download S4A softwere and install it. )
2. 下載Arduino IDE軟體並安裝 ( Download Arduino IDe and install it. )
3. 下載S4AFirmware(韌體)，並從Arduino IDE安裝至Arduino板子 ( Download S4A Firmware and upload it to Arduino board via Arduino IDE )

1. 下載S4A軟體 ( Download S4A Software )

請至網址 http://s4a.cat/，點選 Downloads
Go to URL: http://s4a.cat/ , click "Downloads" menu.

選擇Windows (choose the installer for  your operating system )。

將S4A16.zip解壓縮，之後執行S4A16.exe。
Unzip S4A16.zip file and run the S4A16.exe.

2. 下載Arduino IDE軟體並安裝 (Download Arduino IDE and install it )

請至網址 https://www.arduino.cc/en/Main/Software，選擇 Windows installer
Go to URL: https://www.arduino.cc/en/Main/Software, choose the installer for your operating system.

3. 從 Arduino IDE 安裝S4A韌體 ( Upload S4A firmware via Arduino IDE )

• 從此處下載S4A韌體。( Click HERE to download S4A firmware )
• 透過USB連接Arduino板子至電腦。( Use USB cable to connect Arduino board with a computer )
• 從 Arduino IDE開啟S4AFirmware16.ino檔案。( Open S4AFirmware16.ino from Arduino IDE )
• 檢查IDE上板子的版本與序列埠是否正常連結。 ( Check the connection between Aduino board and Arduino IDE )
• 上傳S4A韌體到板子。 ( Upload S4A firmware to Arduino board )

都沒問題後就可以使用S4A軟體來控制Arduino了！！！
Now, the Arduino board can interact with the S4A.